Draw Bar-AT220049
$1,320.91
John Deere-Draw Bar-AT220049
| Weight | 200 kg |
|---|---|
| Condition |
Used – Good |
New OEM
Used - Good
Used – Good Running Take-Off
Reconditioned
New Aftermarket
Rebuilt
New OEM
- High quality new component.
- Manufacturer’s original part.
- Components includes all manufacturer required seals, bearings and sensors installed.
- Warranty: 12 months, parts only.
Used - Good
- Bores, bushings, hinges, and/or latches are functional but may show wear. Wear will not affect safe function of part.
- Unless otherwise noted, the part has no cracks, welds or bends that are not part of the original manufacturer’s design.
- Glass, if present, will be intact.
- Warranty: 30 days.
Used – Good Running Take-Off
- Component (engine, transmission, axle, final drive, drop box, differential, etc.…) was removed from a running machine.
- Component is run-tested in machine before removal.
- Component is leak-tested after removal from machine.
- Component has been cleaned.
- Warranty: 90 days, parts only.
Reconditioned
- Part has been completely disassembled, inspected, cleaned and prepped.
- New seals are installed.
- Part is reassembled to exact specifications.
- Part is cleaned, prepped and painted.
- Hydraulic Cylinders only: Barrel honed and polished as required.
- Operator Cabs only: Glass replaced, as needed. Door and window latches repaired or replaced, as needed.
- Part is leak-tested and undergoes basic function test.
- Warranty: 90 days, parts only.
New Aftermarket
- High Quality New Component.
- Manufactured to meet OE specifications and tolerances.
- Exact fitment based on corresponding OE part number.
- Includes all manufacturer required seals, bearings and sensors installed.
- Warranty: 12 month, parts only.
Rebuilt
- Part has been completely disassembled, inspected, cleaned and prepped.
- New seals, bearings and friction discs are installed.
- Damaged/worn gears, shafts, or other internal parts are replaced as needed.
- Part is reassembled to exact specifications.
- Part is cleaned, prepped and painted.
- Hydraulic Cylinder only: Rod rechromed/replaced, as needed. Barrel honed and polished.
- Part is leak-tested and undergoes basic function test.
- Warranty: 6 months, parts only.
